This is a 58 key split keyboard with column stagger and VIK support.
Main features:
- Support for the VIK interface. Includes 2 VIK connectors per half!! See this github page for details.
- See the various VIK modules for sale directly from fingerpunch
- Integrated RP2040 controller on both sides
- USB-C interconnect (not TRRS)
- 4, 8, or 16 MB storage (depending on flash availability)
- Per key led support (SK6812 mini-e)
- MX, choc, and KS-27/KS-33 switch support (hotswap only)
- Audio buzzer (pre-soldered on the PCB)
- Supports a cirque trackpad without a VIK module
- You will need to cut a jumper on the back of the PCB to enable it
- Break out pins for
- USB-C pins (in case your port breaks, you can fix it!)
- SPI pins
- I2C pins
- Power pins (3v3, 5v, and GND)
Cases are open source, and available here:
https://github.com/sadekbaroudi/fingerpunch/tree/master/keyboards/ximega/v1/cases
To make this a complete kit, you will need:
- A ximeva v1 case
- Not available for sale here yet, but see the fingerpunch github repository for stls
- hotswap sockets (6x sets of 10)
- If you want to use KS-27 or KS-33 switches, you will need to get the hotswap sockets elsewhere
Optional components:
- cirque trackpad kit
- trackball sensor kit (assuming you get a VIK pmw3360 module, small or extra small)
- per key leds (6x sets of 10)
Notes:
- This listing is for the PCB only
- The pictured builds require additional parts that are not available for sale at fingerpunch, but demonstrate the usage of VIK modules. However, all cases for these builds are open source, as linked above.
