This is a 66 key unibody keyboard with column stagger and VIK support.
Main features:
- Support for the VIK interface. See this github page for details. Also look through the VIK modules to see what you can add on.
- Cirque trackpad support
- Integrated RP2040 controller
- Integrated 2 port USB hub
- Center USB is the main input, and other two to the right are for additional devices
- 4, 8, or 16 MB storage (depending on flash availability)
- Per key led support (SK6812 mini-e)
- MX and choc v1 switch support (hotswap only)
- A rotary encoder under each hand, or evqwgd001 encoders in the bottom center
- Audio buzzer (pre-soldered on the PCB)
- Haptic feedback support ( https://shop.pimoroni.com/en-us/products/drv2605l-linear-actuator-haptic-breakout )
- Break out pins for
- GP15
- GP16
- GP28
- USB-C pins (in case your port breaks, you can fix it!)
- SPI pins
- I2C pins
- Power pins (3v3, 5v, and GND)
To make this a complete kit, you will need:
- pinkies out case (github fingerpunch repo for stls)
- hotswap sockets (7 sets)
Optional components:
- cirque trackpad kit
- per key leds (7 sets)
- rotary encoders (either EC11 or EVQ)
- rotary encoder caps
- pimoroni haptic feedback module
- vik modules for a center feature
- Case files currently support pmw3360 extra small. If interested in other features, DM sadekbaroudi on discord
Firmware:
QMK: https://github.com/sadekbaroudi/qmk_firmware/tree/develop_fingerpunch/keyboards/fingerpunch/pinkiesout/v3_1
ZMK: https://github.com/sadekbaroudi/zmk-fingerpunch-keyboards/tree/main/boards/arm/pinkies_out_v3
Notes:
- ZMK firmware does not mean wireless support. This is wired only.
- This listing is for the PCB only